Tracks
/
V
V
/
Exercises
/
Resistor Color Tolerance
Resistor Color Tolerance

Resistor Color Tolerance

Medium

Instructions

In this exercise, you are going to create a helpful program so that you don't have to remember the values of the bands. The program will take 1, 4, or 5 colors as input and output the correct value in ohms. The color bands are encoded as follows:

Color Value
Black 0
Brown 1
Red 2
Orange 3
Yellow 4
Green 5
Blue 6
Violet 7
Gray 8
White 9

In Resistor Color Trio you decoded the first three color bands. For instance: orange-orange-brown translated to the main value 330. In this exercise you will need to add tolerance to the mix. Tolerance is the maximum amount that a value can be above or below the main value. For example, if the last band is green, the maximum tolerance will be ±0.5%.

The tolerance band will have one of these values:

Color Tolerance
Grey ±0.05%
Violet ±0.10%
Blue ±0.25%
Green ±0.50%
Brown ±1.00%
Red ±2.00%
Gold ±5.00%
Silver ±10.00%

The four-band resistor is built up like this:

Band_1 Band_2 Band_3 Band_4
Value_1 Value_2 Multiplier Tolerance

Examples:

  • orange-orange-brown-green would be 330 ohms with a ±0.5% tolerance.
  • orange-orange-red-grey would be 3300 ohms with a ±0.05% tolerance.

The difference between a four and five-band resistor is that the five-band resistor has an extra band to indicate a more precise value.

Band_1 Band_2 Band_3 Band_4 Band_5
Value_1 Value_2 Value_3 Multiplier Tolerance

Examples:

  • orange-orange-orange-black-green would be 333 ohms with a ±0.5% tolerance.
  • orange-red-orange-blue-violet would be 323 million ohms with a ±0.1% tolerance.

There are also one band resistors. One band resistors only have the color black with a value of 0.

Your program should translate an input list of resistor band colors into a label:

"... ohms ±...%"

So an input list of ["orange", "orange", "black", "green"] should return:

"33 ohms ±0.5%"

When there are thousands of ohms, we say "kiloohms". That's similar to saying "kilometer" for 1000 meters, and "kilograms" for 1000 grams.

So an input list of ["orange", "orange", "orange", "grey"] should return:

"33 kiloohms ±0.05%"

When there are millions of ohms, we say "megaohms".

So an input list of ["orange", "orange", "blue", "red"] should return:

"33 megaohms ±2%"


Source

@meatball133The link opens in a new window or tab
Edit via GitHub The link opens in a new window or tab
V Exercism

Ready to start Resistor Color Tolerance?

Sign up to Exercism to learn and master V with 117 exercises, and real human mentoring, all for free.